Print

  • Home
  • Products
  • Open Dust Collector - Modular
  • DW

DW

Dust Collector

Modular Dust Collector
The BELFAB DW series is engineered as a high efficiency collector solution, capable of filtering large volume of coarse and mixed dust particles or a moderate quantity of fine dust.
Previous Available Systems Next
NEXT STEPS » Get a quote Download Brochure Contact Us 1-866-4BELFAB

Details

The DW is a rugged unit offering a height of less than 11'. This unit is designed to operate as either a dedicated "stand alone", or main dust collector within a woodworking facility.

The DW system integrates BELFAB modular filter technology. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules.

This dust collector series comes with BELFAB patented upgradeable blower. This fan design makes it possible to increase fan performance of our LW/NBM blower from a 2HP/1000CFM to a 20HP/ 5000 CFM, with the simple replacement of the motor, impeller and inlet.

In application where there is a requirement for low sound level (under 84 db), BELFAB HUMMER series is available for application ranging from 10HP to 20HP 5000 CFM.

Also the DW dust collector can integrate a variety of dust removal solution ranging from plastic disposable bags, 55 gallon drums to BELFAB patented tilt truck dust disposal system or our revolutionary pneumatic continuous dust transfer system.

Modules Arrangements
Number of filter modules 1 2 3 4 5 6
Filtration surface* ft2 84 168 252 336 420 504
Dimensions** (W x D x H) 48x48x130 72x48x130 96x48x130 120x48x130 144x48x130 168x48x130
Modules weight (lbs) 250 500 750 1000 1250 1500

* With barrel configuration. ** When equipped with hummer blower module, add 18” to width.

  Standard Blower
3600 RPM		 Hummer Blower
1800 RPM
Fan Module 2HP 3HP 5HP 7.5HP 10HP 15HP 20HP 10HP 15HP 20HP
Capacity (CFM) 1,000 1,400 2,500 3,500 4,600 5,000 6,000 4,600 5,000 6,000
Recommended number of filter modules 1 to 2 1 to 2 1 to 3 2 to 4 2 to 5 3 to 6 4 to 6 2 to 4 3 to 6 4 to 6
Sound pressure* (dB) 80 80 82 84 88 92 92 80 81 83
Inlet diameter (in.) 6 7 9 10 12 14 16 12 14 16
Module weight (lbs) 150 180 200 240 250 340 360 350 450 560

* Without silencer at 10 feet.

Features

  • Low maintenance direct drive centrifugal fan
  • High efficiency TEFC motor, UL & CSA approved
  • High efficiency needle felt filter bag (1/8”thick)
  • Drum attachment includes: filter sleeve & quick release clamp
  • The unit is configured for push application only

Options

  • Tilt truck (plastic bin) & adaptor
  • Silencer (n/a for hummer blower)
  • 55-gallon drums
  • Magnetic starter
  • Dust transfer system

NOTE: NFPA 664 regulations permit open bag dust collector system
with a maximum of 5,000 CFM, where no mechanically fed sanders
are present. Consult NFPA regulations for details.

Guaranty

All BELFAB manufactured equipment carry one-year guaranty
* BELFAB improves its product continuously and may change the specifications without notice

Performance Curves

Note: if your installation develops less static pressure than the minimum indicated on this chart, slide gate restriction should be added in order not to exceed recommended maximum motor amperage.

 

Up to page